Uniden & Grandstream ATASome of the Cordless phones provided by
UsVox are 2 devices, the Analog Telephone Adapter (ATA) and the Cordless phone,
seen in picture
Device information: ATA model
Grandstream HT701, and Cordless Uniden Dect 6.0 WaterProof
Not always you will find this configuration. Uniden cordless doesn't workIf you experience any issues like: no audio after hook flash the cordless, not receiving calls, can’t make calls, device don’t turn on, etc. please follow this suggestions
Please removed the power cord from the back of the ATA Turn the Cordless base upside-down and disconnect the power cord Wait 30 seconds and connect back the power on devices, Wait 2 minutes and make a test call
Uniden cordless doesn't play Dial tone or show a message “Check TEL Line”First you need to make sure the device is connected to the network
Power
And connected to the Analog phone in this case to the Cordless phone
This cord need to be connected to the bottom of the cordless phone base
|
Uniden cordless phone doesn't turn on
Place the phone on the base (Cradle) the top RED light need to turn on
If the light in not on please make sure:
The base is connected to the power The power adapter is connected to the electrical outlet with power Make sure the power adapter cable is not cut or damage Uniden cordless phone power connetionThe phone needs to recharge at least 5 minutes to test (first time connected need 8 hours of charge)
After 5 minutes the screen of the phone need to show the battery icon with at least one bar If
Icon don’t show no Battery bar, please remove the screws from the back plate
Review the battery connection by removing it and reconnecting
After reconnecting the battery close the
cover, tide the screws and turn on the phone will show a bar on the battery
icon
|